icon

Search

AER Domino 3 Acoustic Amplifier

AER released the AER Domino 3 to be the successor to their popular AER Domino amplifier, but the result is a totally different class of acoustic combo amplifiers. The AER Domino 3 delivers stereo sound from two speakers with a powerful 600-watt power amp. Two independent effect units with 16 preset each address pairs of inputs to a pair of pre-amps in the back of the amp (for example, for 2, 3 or 4 channels). AER Domino 3 includes a PC interface that allows you to control the amp from your laptop easily and then manage the effects sent to the channels. You can also create and save your own sounds by utilizing the included Windows interface.

The AER Domino 3 is two small amps, each delivering 100 watts into a pair of 8 speakers; it can be used as a mini PA with four inputs (mini-out). All in a small and discreet enclosure weighing only 35 lb. AER Domino amplifiers are extremely clear and warm sounding and not overdriven with unusually loud sound boosts. It performs very well with piezo or magnetic pickups as well as microphones.

The AER Domino 3 includes AER's 32-bit effects processor that allows a wide variety of effects to be applied to each of the four input channels. Each channel receives its own unique effects-send sequence, so any of the four inputs can be directly controlled through the effects-send sequence. This allows you to produce sound effects that suit your instruments and voice. PC software includes controls to manage the different effects that are produced by the amp. Left and right outputs, combined with the pre-master output, give you the freedom to add an extra speaker or even a recording console to your sound setup.

  • Channel 1 – 4
    combined XLR/6.3 mm (1/4”) input jack socket switchable for instruments,
    line-level or phantom powered sources (e.g. microphones).
  • Equalizer
    three band tone controls for each channel
  • Colour
    ‘mid-cut-treble-boost’-filter
  • Effects
    digital effect processor with 16 presets
  • Power amp
    2 x 100 W / 4 ohms, dynamic control
  • Analog signal processing
    subsonic filter, low distortion
    RMS limiter
  • Speaker system
    2 x 8“ twin-cone speaker system
  • Features
    switchable phantom power, ground lift, rec out,
    aux in, return, send, headphones, tuner, footswitch
    (internal/external effect on/off ),
    adjustable DI-out, 4 channel mute
  • Dimensions
    365 mm x 420 mm x 300 mm
    (14.4“ x 16.6“ x 11.8“), HxWxD
  • Weight
    16,00 kg (35.30 lbs)

Please allow 3 to 5 days to ship

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Search